Common faults of peanut roaster machine

Peanut roaster machine is a kind of professional equipment used to roast peanuts and other nuts. Like all machines, peanut roaster will also have some common faults due to long-term use or improper operation.

Below, let’s take a look at these faults and their solutions.

1, Circuit failure.

Circuit failure is one of the common faults of peanut roaster machine. If the circuit fails, the equipment will not work normally and the production efficiency will be affected. The reasons for this failure may be damaged circuit board, loose wiring and so on. The solution is to check whether the circuit board and wiring are normal, and repair them in time if there are any problems.

2, The speed is too slow or too fast.

Too slow or too fast speed of the peanut roaster machine will affect the roasting effect of peanuts. This failure may be caused by motor damage, belt slack and other reasons. The solution is to check whether the motor works normally and replace it in time if there is any problem; At the same time, adjust the belt tension to ensure the normal speed.

3, Temperature control failure.

Failure of temperature control is another common failure of peanut roaster machine. If the temperature control fails, it will lead to over-roasting or incomplete roasting of peanuts and affect the quality. The reasons for this failure may be the damage of temperature sensor and the failure of controller. The solution is to check whether the temperature sensor and controller work normally, and replace them in time if there are any problems.

In a word, the peanut roaster machine is a very practical equipment, but there will be various failures in the process of use. The key is to find the problems in time and take effective measures to repair them. At the same time, we should also pay attention to safety when using peanut roaster to avoid accidents.